Battery Replacement Procedure

Replacing four (4) D size batteries with 6 V DC Rechargable Battery with Pin spacing 0.1" for the connector. - Click to Enlarge

A. Cable and plug. Pin spacing 0.1" Click to Enlarge

B. Replacement Battery 6 VDC 1.3 AH - CAT# GC-613 Size 3.85"X2.10"X0.98" Click to Enlarge

The above are the parts that is needed to replace the four "D" size batteries with one rechargable battery.

1. Take five screws from the bottom of the robot.	2. Turn the robot up and separate cheerfully. 3. Unplug the five plugs from the robot. ( They are keyed and color and pin coded. ) Click to Enlarge
4. Solder the plug and wire to the (+) positive and (-) negative terminals as shown. 5. Reassemble the robot. Click to Enlarge	5. Plug in the battery and close the door. ( You are ready to go. ) Click to Enlarge

---

There is no warranty expressed or implied with this procedure. By using any information from this web site, you agree not to hold responsible this site, me, nor any of its representatives, for any injuries and/or damages, both physical and/or psychological, that may arise from the use and/or misuse of anything derived from this site. The user further agrees that such information/pictures does not constitute any guarantee of accuracy, safety or reliability, and that cannot be held responsible for any way. The user agrees to proceed at their own risk.

---